According to EMMI Decree No 33/2016 (XI. 29.) of the Minister of Human Capacities (hereinafter: the Decree), it is mandatory to carry out a risk assessment for electromagnetic exposure. This obligation under the Directive 2013/35/EU has been transposed by all EU Member States.

More about the Decree

CERTIFIED GREEN

How can you turn your home green, when it comes to radiation?

Read about our radiation measurement and building protection protocol.

Radiation measurement
Analysis of measured data and handing over the log to the client
Customised green solutions – making quotations for our building protection technology
Scheduling installation
Installing the building protection technology
Control measurement and certified report – verifying reduction in radiation exposure
Home certified as green

1

RADIATION MEASUREMENT

Electromagnetic radiation (electrosmog) is measured using measuring instruments certified by regular calibration in an American accredited laboratory. Exposure is analysed at several measuring points so that the sources of hazard can be identified.

The scope of our measurements includes the parameters of electrosmog (electric field, magnetic field, high frequency power density), radioactive radiation and geocosmic pathogenic distortions (underground water veins, magnetic fields where Hartmann lines cross).

Measurement base fee, 180 EUR + service call fee

Low frequency electric and/or magnetic field (1 Hz-400 KHz)

High frequency electromagnetic fields (100 KHz-6 GHz)

Radon radioactivity measurement

Atmospheric versus ground potential

EVALUATION BY ANOMALIES

Health risks are assessed according to the limits set in the SBM 2008/2015 international standards for Building Biology Testing Methods.

No concern

Electric field strength
<1 V/m
Atmospheric versus ground potential
10 mV
High frequency power density
<0,1 µW/m²
Magnetic induction
<20 nT
Radon radioactivity (%)
<0.3µSv/h
Geomagnetic field (%)
<10%

Minor concern

Electric field strength
<1-5 V/m
Atmospheric versus ground potential
10-100 mV
High frequency power density
<0,1-10 µW/m²
Magnetic induction
<20-100 nT
Radon radioactivity (%)
50-70%
Geomagnetic field (%)
10-20%

Severe concern

Electric field strength
<5-50 V/m
Atmospheric versus ground potential
100-1000 mV
High frequency power density
10-1000 µW/m²
Magnetic induction
100-500 nT
Radon radioactivity (%)
70-100%
Geomagnetic field (%)
20-50%

Extreme concern

Electric field strength
>50 V/m
Atmospheric versus ground potential
>1000 mV
High frequency power density
>1000 µW/m²
Magnetic induction
>500 nT
Radon radioactivity (%)
>100%
Geomagnetic field (%)
>50%

3

IN THE CASE OF SEVERE OR EXTREME CONCERN, A QUOTATION WILL BE PREPARED FOR AN EFFECTIVE SOLUTION

THE POLLUTION OF AN AVERAGE APARTMENT IN BUDAPEST

Chart by Visualizer

Chart by Visualizer

Chart by Visualizer

Chart by Visualizer

4

SCHEDULING THE INSTALLATION OF THE PROTECTION SYSTEM

Special high-grade stainless steel, manufactured with a precision surfacing tool, using a special laser-etching technology. We determine the location and number of pieces of equipment together with the owners, following instrumental measurements and order.

Required quantity: 1 piece per 100 m2.

Colour: RAL basic white, gold

RAL extra +HUF 50,000

5

Installation is carried out by two engineers. The two main units of the technology – a resonator and a control unit – are connected to the water pipes of the heating system in the central building engineering unit. The resonator is 1 m tall, 40 cm wide and 15 cm deep. The capacity of the control unit will match the radiation exposure in the rooms. Existing structures will not be damaged by the installation activities.

7

COMPARATIVE REPORT ON THE REDUCTION IN RADIATION EXPOSURE

COMPARATIVE REPORT

CLASSIFICATION AS GREEN (ELECTROSMOG-FREE) AREA

The GREEN certification concerning radiation is granted. It does not only mean the premises are safe concerning health risks, but will also effectively increase the value of the property.

We offer a 15-year guarantee.